AD977ARZ vs AD977ARS 比較
詳細並排比較 AD977ARZ 由 Analog Devices 與 AD977ARS 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD977ARZ | AD977ARS |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | ADC/DAC | ADC/DAC |
| 生命週期狀態 | Unknown | 啟用中 |
| 解析度 | 16 bit | 16 bit |
| 取樣率 | 100 kSPS | — |
| Number of Inputs | 1 input | — |
| Input Type | Single-ended | — |
| ADC Architecture | Successive approximation, switched-capacitor | — |
| Analog Supply Voltage Range | 4.75 V to 5.25 V | — |
| Nominal Supply Voltage | 5 V | — |
| Internal Reference Voltage | 2.5 V | 2.5 V |
| Data Interface | Serial | Serial interface |
| Maximum Power Dissipation | 100 mW | 100 mW |
| Factory Calibration | Factory calibrated to minimize gain, offset, and nonlinearity errors | Factory calibrated |
| 封裝 | 20-pin SOIC | 28-pin SSOP |
| 安裝類型 | Surface mount | Surface mount |
| Analog Inputs | 1 unipolar analog input | — |
| Power-Down Mode | Available | Supported |
| 工作溫度範圍 | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Supply Voltage | [DATA_NEEDED: Digital supply voltage range] | — |
| Input Full-Scale Range | [DATA_NEEDED: Analog input full-scale range] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | — |
| INL | [DATA_NEEDED: Integral nonlinearity] | — |
| ENOB | [DATA_NEEDED: Effective number of bits] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| ADC Type | — | Successive-approximation switched-capacitor ADC |
| Throughput Rate | — | 100 kSPS |
| 供應電壓 | — | 5 V |
| Supply Configuration | — | Single supply |
| Input Channels | — | 1 channel |
| Unipolar Input Range | — | 0 V to 5 V or 0 V to 4 V |
| Bipolar Input Range | — | +/-5 V or +/-3.3 V |
| Analog Input Type | — | Single-ended input |
| Conversion Architecture | — | SAR with switched-capacitor internal DAC |
| Reference Source | — | Internal 2.5 V reference; external reference support [DATA_NEEDED: external-reference details] |
| REACH Status | — | [DATA_NEEDED: REACH status] |