AD977ARZ vs AD977ARS Comparaison
Comparaison détaillée côte à côte de AD977ARZ par Analog Devices et AD977ARS par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD977ARZ | AD977ARS |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Unknown | Actif |
| Résolution | 16 bit | 16 bit |
| Fréquence d'échantillonnage | 100 kSPS | — |
| Number of Inputs | 1 input | — |
| Input Type | Single-ended | — |
| ADC Architecture | Successive approximation, switched-capacitor | — |
| Analog Supply Voltage Range | 4.75 V to 5.25 V | — |
| Nominal Supply Voltage | 5 V | — |
| Internal Reference Voltage | 2.5 V | 2.5 V |
| Data Interface | Serial | Serial interface |
| Maximum Power Dissipation | 100 mW | 100 mW |
| Factory Calibration | Factory calibrated to minimize gain, offset, and nonlinearity errors | Factory calibrated |
| Boîtier | 20-pin SOIC | 28-pin SSOP |
| Type de montage | Surface mount | Surface mount |
| Analog Inputs | 1 unipolar analog input | — |
| Power-Down Mode | Available | Supported |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Supply Voltage | [DATA_NEEDED: Digital supply voltage range] | — |
| Input Full-Scale Range | [DATA_NEEDED: Analog input full-scale range] | — |
| Input Impedance | [DATA_NEEDED: Input impedance] | — |
| SNR | [DATA_NEEDED: Signal-to-noise ratio] | — |
| INL | [DATA_NEEDED: Integral nonlinearity] | — |
| ENOB | [DATA_NEEDED: Effective number of bits] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| ADC Type | — | Successive-approximation switched-capacitor ADC |
| Throughput Rate | — | 100 kSPS |
| Tension d'alimentation | — | 5 V |
| Supply Configuration | — | Single supply |
| Input Channels | — | 1 channel |
| Unipolar Input Range | — | 0 V to 5 V or 0 V to 4 V |
| Bipolar Input Range | — | +/-5 V or +/-3.3 V |
| Analog Input Type | — | Single-ended input |
| Conversion Architecture | — | SAR with switched-capacitor internal DAC |
| Reference Source | — | Internal 2.5 V reference; external reference support [DATA_NEEDED: external-reference details] |
| REACH Status | — | [DATA_NEEDED: REACH status] |