ADM232LAR vs MAX232DR Vergleich
Detaillierter Direktvergleich von ADM232LAR von Analog Devices und MAX232DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ AktivSpezifikationsvergleich
| Parameter | ADM232LAR | MAX232DR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Versorgungsspannung | 5 V (single supply) | — |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | — |
| Datenrate | 120 kB/s | 120 kbps |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| Gehäuse | 16-lead SOIC (SOIC-16) | SOIC-16 (D) |
| Anzahl der Pins | 16 | — |
| Montageart | Surface Mount | Surface Mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | 8 mA typical |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status for ADM232LAR] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | — |
| Funktion | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Receiver Input Levels | — | +/-30 V tolerant |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Betriebstemperatur | — | 0 C to +70 C (commercial grade) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |