ADM232LAR vs MAX232DR Comparaison
Comparaison détaillée côte à côte de ADM232LAR par Analog Devices et MAX232DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ ActifComparaison des spécifications
| Paramètre | ADM232LAR | MAX232DR |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Tension d'alimentation | 5 V (single supply) | — |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | — |
| Débit de données | 120 kB/s | 120 kbps |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| Boîtier | 16-lead SOIC (SOIC-16) | SOIC-16 (D) |
| Nombre de broches | 16 | — |
| Type de montage | Surface Mount | Surface Mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | 8 mA typical |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status for ADM232LAR] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | — |
| Fonction | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Receiver Input Levels | — | +/-30 V tolerant |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Température de fonctionnement | — | 0 C to +70 C (commercial grade) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |