ADM232LAR vs MAX232DR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ADM232LAR sa pamamagitan ng Analog Devices at MAX232DR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices
ADM232LAR ✓ NakahandaTexas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ADM232LAR | MAX232DR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Volte ng Pagbibigay | 5 V (single supply) | — |
| Transceiver Configuration | 2 drivers / 2 receivers (2/2) | — |
| Rate ng Data | 120 kB/s | 120 kbps |
| Interface Standard Compliance | EIA-232-E and V.28 | — |
| Output Swing | 9 V with 5 V supply | — |
| On-Board DC-DC Converters | Yes | — |
| Required External Capacitors | 1 uF | — |
| Shutdown | Low power shutdown mode | — |
| Receiver Supply Current in Shutdown | 1 uA (receivers active in shutdown) | — |
| Receiver Input Voltage Tolerance | 30 V | — |
| Packhaging | 16-lead SOIC (SOIC-16) | SOIC-16 (D) |
| Bilang ng Pins | 16 | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Technology | CMOS | — |
| Automotive Qualification (AEC-Q100) | not_applicable | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: typical and maximum supply current] | 8 mA typical |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status for ADM232LAR] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status for ADM232LAR] | — |
| Fungsi | — | Dual RS-232 line driver/receiver (2/2 transceiver, full) |
| Supply Voltage (Vcc) | — | 4.5 V to 5.5 V |
| Receiver Input Levels | — | +/-30 V tolerant |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Charge Pump Capacitors Required | — | 4 external (typically 1 uF) |
| Generated RS-232 Rails | — | Approx. +/-9 V to +/-10 V from internal charge pump |
| Compliance | — | TIA/EIA-232-F, ITU V.28 |
| ESD Protection (RS-232 pins) | — | [DATA_NEEDED: datasheet ESD figure] |
| Temperature na Operasyon | — | 0 C to +70 C (commercial grade) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free] |
| Interchangeable With | — | Maxim MAX232 (industry-standard die) |