ADM232LAR vs MAX232DR 比較

詳細な並列比較: ADM232LAR メーカー: Analog Devices および MAX232DR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ ADM232LAR MAX232DR
ブランド Analog Devices Texas Instruments
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
電源電圧 5 V (single supply) —
Transceiver Configuration 2 drivers / 2 receivers (2/2) —
データレート 120 kB/s 120 kbps
Interface Standard Compliance EIA-232-E and V.28 —
Output Swing 9 V with 5 V supply —
On-Board DC-DC Converters Yes —
Required External Capacitors 1 uF —
Shutdown Low power shutdown mode —
Receiver Supply Current in Shutdown 1 uA (receivers active in shutdown) —
Receiver Input Voltage Tolerance 30 V —
パッケージ 16-lead SOIC (SOIC-16) SOIC-16 (D)
ピン数 16 —
実装タイプ Surface Mount Surface Mount
Technology CMOS —
Automotive Qualification (AEC-Q100) not_applicable —
電源電流 [DATA_NEEDED: typical and maximum supply current] 8 mA typical
動作温度範囲 [DATA_NEEDED: operating temperature range] —
Driver Output Current [DATA_NEEDED: driver output current] —
RoHS ステータス [DATA_NEEDED: RoHS status for ADM232LAR] Compliant
REACH Status [DATA_NEEDED: REACH status for ADM232LAR] —
機能 — Dual RS-232 line driver/receiver (2/2 transceiver, full)
Supply Voltage (Vcc) — 4.5 V to 5.5 V
Receiver Input Levels — +/-30 V tolerant
Number of Drivers — 2
Number of Receivers — 2
Charge Pump Capacitors Required — 4 external (typically 1 uF)
Generated RS-232 Rails — Approx. +/-9 V to +/-10 V from internal charge pump
Compliance — TIA/EIA-232-F, ITU V.28
ESD Protection (RS-232 pins) — [DATA_NEEDED: datasheet ESD figure]
動作温度 — 0 C to +70 C (commercial grade)
Lead-Free / Halogen-Free — Yes / [DATA_NEEDED: halogen-free]
Interchangeable With — Maxim MAX232 (industry-standard die)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼