ADM242AR vs ADM485ARZ Vergleich
Detaillierter Direktvergleich von ADM242AR von Analog Devices und ADM485ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM242AR | ADM485ARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $1,62 |
| Product Type | CMOS RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 200 kbps | — |
| Versorgungsspannung | 4.5 V to 5.5 V | 5 V (single supply) |
| Nominal Supply | 5 V | — |
| External Charge-Pump Capacitor | 0.1 µF | — |
| Gehäuse | SOIC-18 | SOIC-8 (SO-8) / SO-8 |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperatur | -40°C to +85°C | — |
| Driver and Receiver Configuration | 2/2 full RS-232 transceiver | — |
| Logic Compatibility | CMOS RS-232 | — |
| Charge-Pump Architecture | On-chip charge pump | — |
| RS-232 Level Generation | Bipolar levels generated from 5 V supply | — |
| Supply Type | Single supply | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Betriebstemperaturbereich | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |