ADM242AR vs ADM485ARZ Comparación
Comparación detallada lado a lado de ADM242AR por Analog Devices y ADM485ARZ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM242AR | ADM485ARZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,00 | $1,62 |
| Product Type | CMOS RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 200 kbps | — |
| Tensión de alimentación | 4.5 V to 5.5 V | 5 V (single supply) |
| Nominal Supply | 5 V | — |
| External Charge-Pump Capacitor | 0.1 µF | — |
| Encapsulado | SOIC-18 | SOIC-8 (SO-8) / SO-8 |
| Tipo de montaje | Surface mount | Surface Mount |
| Temperatura de funcionamiento | -40°C to +85°C | — |
| Driver and Receiver Configuration | 2/2 full RS-232 transceiver | — |
| Logic Compatibility | CMOS RS-232 | — |
| Charge-Pump Architecture | On-chip charge pump | — |
| RS-232 Level Generation | Bipolar levels generated from 5 V supply | — |
| Supply Type | Single supply | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Velocidad de datos | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Rango de temperatura de funcionamiento | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Nivel MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |