ADM242AR vs ADM485ARZ Сравнение
Подробное сравнение бок о бок ADM242AR от Analog Devices и ADM485ARZ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ АктивенСравнение характеристик
| Параметр | ADM242AR | ADM485ARZ |
|---|---|---|
| Бренд | Analog Devices | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,00 | $1,62 |
| Product Type | CMOS RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 200 kbps | — |
| Напряжение питания | 4.5 V to 5.5 V | 5 V (single supply) |
| Nominal Supply | 5 V | — |
| External Charge-Pump Capacitor | 0.1 µF | — |
| Корпус | SOIC-18 | SOIC-8 (SO-8) / SO-8 |
| Тип монтажа | Surface mount | Surface Mount |
| Рабочая температура | -40°C to +85°C | — |
| Driver and Receiver Configuration | 2/2 full RS-232 transceiver | — |
| Logic Compatibility | CMOS RS-232 | — |
| Charge-Pump Architecture | On-chip charge pump | — |
| RS-232 Level Generation | Bipolar levels generated from 5 V supply | — |
| Supply Type | Single supply | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Скорость передачи данных | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Диапазон рабочих температур | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Уровень MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |