ADM242AR vs ADM485ARZ Comparaison
Comparaison détaillée côte à côte de ADM242AR par Analog Devices et ADM485ARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActifComparaison des spécifications
| Paramètre | ADM242AR | ADM485ARZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $1,62 |
| Product Type | CMOS RS-232 transceiver | — |
| Driver Count | 2 | — |
| Receiver Count | 2 | — |
| Maximum Data Rate | 200 kbps | — |
| Tension d'alimentation | 4.5 V to 5.5 V | 5 V (single supply) |
| Nominal Supply | 5 V | — |
| External Charge-Pump Capacitor | 0.1 µF | — |
| Boîtier | SOIC-18 | SOIC-8 (SO-8) / SO-8 |
| Type de montage | Surface mount | Surface Mount |
| Température de fonctionnement | -40°C to +85°C | — |
| Driver and Receiver Configuration | 2/2 full RS-232 transceiver | — |
| Logic Compatibility | CMOS RS-232 | — |
| Charge-Pump Architecture | On-chip charge pump | — |
| RS-232 Level Generation | Bipolar levels generated from 5 V supply | — |
| Supply Type | Single supply | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Débit de données | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Plage de température de fonctionnement | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Niveau MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |