BTS3035TFATMA1 vs BTS428L2ATMA1 Vergleich
Detaillierter Direktvergleich von BTS3035TFATMA1 von Infineon und BTS428L2ATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3035TFATMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,61 | $1,45 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | CMOS-compatible, ground-referenced |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Betriebstemperaturbereich | -40C to +150C (junction) | [DATA_NEEDED: min/max] |
| Gehäuse | PG-TO252-3-313 (DPAK) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS-Status | Compliant | — |
| Automotive Grade | AEC-Q100 qualified | — |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |