BTS3035TFATMA1 vs BTS428L2ATMA1 Comparação
Comparação detalhada lado a lado de BTS3035TFATMA1 por Infineon e BTS428L2ATMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS3035TFATMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,61 | $1,45 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | CMOS-compatible, ground-referenced |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Faixa de temperatura de operação | -40C to +150C (junction) | [DATA_NEEDED: min/max] |
| Encapsulamento | PG-TO252-3-313 (DPAK) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Nível MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Status RoHS | Compliant | — |
| Automotive Grade | AEC-Q100 qualified | — |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Tensão de alimentação de operação | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |