BTS3035TFATMA1 vs BTS428L2ATMA1 비교
다음의 상세 나란히 비교: BTS3035TFATMA1 제조: Infineon 및 BTS428L2ATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS3035TFATMA1 | BTS428L2ATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.61 | $1.45 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | CMOS-compatible, ground-referenced |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| 동작 온도 범위 | -40C to +150C (junction) | [DATA_NEEDED: min/max] |
| 패키지 | PG-TO252-3-313 (DPAK) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS 상태 | Compliant | — |
| Automotive Grade | AEC-Q100 qualified | — |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| 동작 공급 전압 | — | [DATA_NEEDED: nominal and range] |
| Standby Current | — | Very low (per datasheet) |
| Overvoltage Protection | — | Load-dump / overvoltage clamp |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |