BTS3035TFATMA1 vs BTS428L2ATMA1 Comparison
Detailed side-by-side comparison of BTS3035TFATMA1 by Infineon and BTS428L2ATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS3035TFATMA1 | BTS428L2ATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.61 | $1.45 |
| Product Type | Low-Side Power Switch | Smart High-Side Power Switch |
| Technology | N-Channel MOSFET | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | 1 | 1 |
| Input Type | CMOS Logic Level | CMOS-compatible, ground-referenced |
| Continuous Drain Current | 5 A | β |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | β |
| Drain-Source Voltage (VDS) Max | 40 V | β |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | β |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | β |
| Status Feedback | Yes (open-drain diagnostic output) | β |
| Reverse Battery Protection | Integrated | β |
| Operating Temperature Range | -40C to +150C (junction) | [DATA_NEEDED: min/max] |
| Package | PG-TO252-3-313 (DPAK) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL moisture sensitivity level] | β |
| RoHS Status | Compliant | β |
| Automotive Grade | AEC-Q100 qualified | β |
| On-State Resistance (R_DS(on)) | β | 50 mOhm (typical) |
| Continuous Load Current | β | 5.8 A |
| Operating Supply Voltage | β | [DATA_NEEDED: nominal and range] |
| Standby Current | β | Very low (per datasheet) |
| Overvoltage Protection | β | Load-dump / overvoltage clamp |
| Overtemperature Protection | β | Yes, with autorestart |
| Diagnostic Feedback | β | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | β | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | β | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | β | Automotive-grade (PROFET family) |