INA111BP vs INA114BP Vergleich
Detaillierter Direktvergleich von INA111BP von Texas Instruments und INA114BP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ AktivSpezifikationsvergleich
| Parameter | INA111BP | INA114BP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Circuits | 1 circuit | — |
| Device Type | High-speed FET-input instrumentation amplifier | — |
| Gehäuse | 8-pin PDIP | 8-pin PDIP |
| Montageart | Through-hole | Through-hole |
| Input Bias Current | 20 pA maximum | 2 nA maximum |
| Offset Voltage | 500 uV maximum | — |
| Offset Voltage Drift | 5 uV/°C maximum | — |
| Common-Mode Rejection Ratio | 106 dB minimum | 115 dB minimum |
| Bandwidth | 2 MHz at gain 10 | — |
| Settling Time | 4 us to 0.01% at gain 100 | — |
| Slew Rate | 17 V/us | — |
| Gain Range | 1 to greater than 1000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Signal Topology | Current-feedback | — |
| Input Stage | FET input | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Ausgangsspannungsbereich | [DATA_NEEDED: output voltage range] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 degrees C to +85 degrees C |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise | — | 11 nV/sqrt(Hz) |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.25 uV/degree C maximum |
| Input Overvoltage Protection | — | +/-40 V |
| Versorgungsspannung | — | +/-18 V maximum |
| Ruhestrom | — | 3 mA maximum |
| Gain Configuration | — | Single external resistor |