INA111BP vs INA114BP Comparación
Comparación detallada lado a lado de INA111BP por Texas Instruments y INA114BP por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ ActivoComparación de especificaciones
| Parámetro | INA111BP | INA114BP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Number of Circuits | 1 circuit | — |
| Device Type | High-speed FET-input instrumentation amplifier | — |
| Encapsulado | 8-pin PDIP | 8-pin PDIP |
| Tipo de montaje | Through-hole | Through-hole |
| Input Bias Current | 20 pA maximum | 2 nA maximum |
| Offset Voltage | 500 uV maximum | — |
| Offset Voltage Drift | 5 uV/°C maximum | — |
| Common-Mode Rejection Ratio | 106 dB minimum | 115 dB minimum |
| Bandwidth | 2 MHz at gain 10 | — |
| Settling Time | 4 us to 0.01% at gain 100 | — |
| Slew Rate | 17 V/us | — |
| Gain Range | 1 to greater than 1000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Signal Topology | Current-feedback | — |
| Input Stage | FET input | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Rango de tensión de salida | [DATA_NEEDED: output voltage range] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 degrees C to +85 degrees C |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise | — | 11 nV/sqrt(Hz) |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.25 uV/degree C maximum |
| Input Overvoltage Protection | — | +/-40 V |
| Tensión de alimentación | — | +/-18 V maximum |
| Corriente en reposo | — | 3 mA maximum |
| Gain Configuration | — | Single external resistor |