INA111BP vs INA114BP 比較
詳細な並列比較: INA111BP メーカー: Texas Instruments および INA114BP メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | INA111BP | INA114BP |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Number of Circuits | 1 circuit | — |
| Device Type | High-speed FET-input instrumentation amplifier | — |
| パッケージ | 8-pin PDIP | 8-pin PDIP |
| 実装タイプ | Through-hole | Through-hole |
| Input Bias Current | 20 pA maximum | 2 nA maximum |
| Offset Voltage | 500 uV maximum | — |
| Offset Voltage Drift | 5 uV/°C maximum | — |
| Common-Mode Rejection Ratio | 106 dB minimum | 115 dB minimum |
| Bandwidth | 2 MHz at gain 10 | — |
| Settling Time | 4 us to 0.01% at gain 100 | — |
| Slew Rate | 17 V/us | — |
| Gain Range | 1 to greater than 1000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Signal Topology | Current-feedback | — |
| Input Stage | FET input | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| 出力電圧範囲 | [DATA_NEEDED: output voltage range] | — |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | -40 degrees C to +85 degrees C |
| RoHS ステータス | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise | — | 11 nV/sqrt(Hz) |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.25 uV/degree C maximum |
| Input Overvoltage Protection | — | +/-40 V |
| 電源電圧 | — | +/-18 V maximum |
| 静止電流 | — | 3 mA maximum |
| Gain Configuration | — | Single external resistor |