INA111BP vs INA114BP Comparaison
Comparaison détaillée côte à côte de INA111BP par Texas Instruments et INA114BP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA111BP - 2MHz FET-Input Instrumentation Amp | Texas Instruments
INA111BP ✓ ActifComparaison des spécifications
| Paramètre | INA111BP | INA114BP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Circuits | 1 circuit | — |
| Device Type | High-speed FET-input instrumentation amplifier | — |
| Boîtier | 8-pin PDIP | 8-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Input Bias Current | 20 pA maximum | 2 nA maximum |
| Offset Voltage | 500 uV maximum | — |
| Offset Voltage Drift | 5 uV/°C maximum | — |
| Common-Mode Rejection Ratio | 106 dB minimum | 115 dB minimum |
| Bandwidth | 2 MHz at gain 10 | — |
| Settling Time | 4 us to 0.01% at gain 100 | — |
| Slew Rate | 17 V/us | — |
| Gain Range | 1 to greater than 1000 | 1 to 10,000 |
| Gain Setting | One external resistor | — |
| Signal Topology | Current-feedback | — |
| Input Stage | FET input | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Plage de tension de sortie | [DATA_NEEDED: output voltage range] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 degrees C to +85 degrees C |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Noise | — | 11 nV/sqrt(Hz) |
| Input Offset Voltage | — | 50 uV maximum |
| Input Offset Drift | — | 0.25 uV/degree C maximum |
| Input Overvoltage Protection | — | +/-40 V |
| Tension d'alimentation | — | +/-18 V maximum |
| Courant de repos | — | 3 mA maximum |
| Gain Configuration | — | Single external resistor |