INA122UA vs INA126U Vergleich
Detaillierter Direktvergleich von INA122UA von Texas Instruments und INA126U von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ AktivSpezifikationsvergleich
| Parameter | INA122UA | INA126U |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Number of Channels | 1 circuit | — |
| Single-Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Voltage Range | +/-18 V | — |
| Ruhestrom | 60 uA | 175 µA per channel |
| Gain-Bandwidth Product | 120 kHz | [DATA_NEEDED: gain-bandwidth product] |
| Input Common-Mode Range | Approximately 0.1 V below the negative supply | [DATA_NEEDED: input common-mode range] |
| Output Swing | Rail-to-rail | — |
| Maximum Offset Voltage | 250 uV | — |
| Maximum Offset Drift | 3 uV/degree Celsius | — |
| Noise | [DATA_NEEDED: noise specification] | — |
| Gain Range | [DATA_NEEDED: programmable gain range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Montageart | Surface mount | Surface mount |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Device Type | — | Single-circuit micropower precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Offset Voltage | — | 250 µV |
| Circuit Count | — | 1 amplifier |
| Signal Type | — | Differential signal acquisition |
| Gain Configuration | — | External gain-setting resistor |
| Maximum Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |