INA122UA vs INA126U Perbandingan
Perbandingan bersamaan detil INA122UA dari Texas Instruments dan INA126U dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA122UA | INA126U |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Number of Channels | 1 circuit | — |
| Single-Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Voltage Range | +/-18 V | — |
| Arus Memerintah | 60 uA | 175 µA per channel |
| Gain-Bandwidth Product | 120 kHz | [DATA_NEEDED: gain-bandwidth product] |
| Input Common-Mode Range | Approximately 0.1 V below the negative supply | [DATA_NEEDED: input common-mode range] |
| Output Swing | Rail-to-rail | — |
| Maximum Offset Voltage | 250 uV | — |
| Maximum Offset Drift | 3 uV/degree Celsius | — |
| Noise | [DATA_NEEDED: noise specification] | — |
| Gain Range | [DATA_NEEDED: programmable gain range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Device Type | — | Single-circuit micropower precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Offset Voltage | — | 250 µV |
| Circuit Count | — | 1 amplifier |
| Signal Type | — | Differential signal acquisition |
| Gain Configuration | — | External gain-setting resistor |
| Maximum Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |