INA122UA vs INA126U Comparação
Comparação detalhada lado a lado de INA122UA por Texas Instruments e INA126U por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ AtivoComparação de especificações
| Parâmetro | INA122UA | INA126U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Number of Channels | 1 circuit | — |
| Single-Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Voltage Range | +/-18 V | — |
| Corrente de repouso | 60 uA | 175 µA per channel |
| Gain-Bandwidth Product | 120 kHz | [DATA_NEEDED: gain-bandwidth product] |
| Input Common-Mode Range | Approximately 0.1 V below the negative supply | [DATA_NEEDED: input common-mode range] |
| Output Swing | Rail-to-rail | — |
| Maximum Offset Voltage | 250 uV | — |
| Maximum Offset Drift | 3 uV/degree Celsius | — |
| Noise | [DATA_NEEDED: noise specification] | — |
| Gain Range | [DATA_NEEDED: programmable gain range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Tipo de montagem | Surface mount | Surface mount |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Device Type | — | Single-circuit micropower precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Offset Voltage | — | 250 µV |
| Circuit Count | — | 1 amplifier |
| Signal Type | — | Differential signal acquisition |
| Gain Configuration | — | External gain-setting resistor |
| Maximum Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |