INA122UA vs INA126U Comparaison
Comparaison détaillée côte à côte de INA122UA par Texas Instruments et INA126U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ ActifComparaison des spécifications
| Paramètre | INA122UA | INA126U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Number of Channels | 1 circuit | — |
| Single-Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Voltage Range | +/-18 V | — |
| Courant de repos | 60 uA | 175 µA per channel |
| Gain-Bandwidth Product | 120 kHz | [DATA_NEEDED: gain-bandwidth product] |
| Input Common-Mode Range | Approximately 0.1 V below the negative supply | [DATA_NEEDED: input common-mode range] |
| Output Swing | Rail-to-rail | — |
| Maximum Offset Voltage | 250 uV | — |
| Maximum Offset Drift | 3 uV/degree Celsius | — |
| Noise | [DATA_NEEDED: noise specification] | — |
| Gain Range | [DATA_NEEDED: programmable gain range] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC | 8-pin SOIC, 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Device Type | — | Single-circuit micropower precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Offset Voltage | — | 250 µV |
| Circuit Count | — | 1 amplifier |
| Signal Type | — | Differential signal acquisition |
| Gain Configuration | — | External gain-setting resistor |
| Maximum Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Noise Voltage Density | — | [DATA_NEEDED: noise voltage density] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |