INA141UAG4 vs INA141UA Vergleich
Detaillierter Direktvergleich von INA141UAG4 von Texas Instruments und INA141UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteSpezifikationsvergleich
| Parameter | INA141UAG4 | INA141UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Count | 3 amplifiers | — |
| Gain | 10 or 100 | — |
| Bandwidth | 1 MHz | — |
| Common-Mode Rejection Ratio | 110 dB | — |
| Input Offset Voltage | 20 µV | — |
| Input Offset Voltage, Datasheet Listing | 250 µV | — |
| Input Noise Density | 8 nV/√Hz | — |
| Ausgangstyp | Single-ended | — |
| Gehäuse | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode voltage range] |
| Ausgangsspannungsbereich | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage swing range] |
| Versorgungsstrom | [DATA_NEEDED: typical supply current] | — |
| Ruhestrom | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: numeric quiescent current] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: numeric operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Amplifier Type | — | Instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Number of Circuits | — | 1 circuit |
| Selectable Gain | — | 10 V/V or 100 V/V |
| Bandwidth at G=100 | — | 200 kHz |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Maximum Protected Input Voltage | — | ±40 V |
| Gain Accuracy | — | [DATA_NEEDED: numeric gain error and tolerance] |
| Temperature Grade | — | Industrial |
| Terminal Count | — | 8 terminals |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |