INA141UAG4 vs INA141UA 比較
詳細並排比較 INA141UAG4 由 Texas Instruments 與 INA141UA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 Obsolete規格比較
| 參數 | INA141UAG4 | INA141UA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | Obsolete | 啟用中 |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Count | 3 amplifiers | — |
| Gain | 10 or 100 | — |
| Bandwidth | 1 MHz | — |
| Common-Mode Rejection Ratio | 110 dB | — |
| Input Offset Voltage | 20 µV | — |
| Input Offset Voltage, Datasheet Listing | 250 µV | — |
| Input Noise Density | 8 nV/√Hz | — |
| 輸出類型 | Single-ended | — |
| 封裝 | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode voltage range] |
| 輸出電壓範圍 | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage swing range] |
| 供應電流 | [DATA_NEEDED: typical supply current] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: numeric quiescent current] |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: numeric operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Amplifier Type | — | Instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Number of Circuits | — | 1 circuit |
| Selectable Gain | — | 10 V/V or 100 V/V |
| Bandwidth at G=100 | — | 200 kHz |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Maximum Protected Input Voltage | — | ±40 V |
| Gain Accuracy | — | [DATA_NEEDED: numeric gain error and tolerance] |
| Temperature Grade | — | Industrial |
| Terminal Count | — | 8 terminals |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |