INA141UAG4 vs INA141UA Comparaison
Comparaison détaillée côte à côte de INA141UAG4 par Texas Instruments et INA141UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteComparaison des spécifications
| Paramètre | INA141UAG4 | INA141UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Count | 3 amplifiers | — |
| Gain | 10 or 100 | — |
| Bandwidth | 1 MHz | — |
| Common-Mode Rejection Ratio | 110 dB | — |
| Input Offset Voltage | 20 µV | — |
| Input Offset Voltage, Datasheet Listing | 250 µV | — |
| Input Noise Density | 8 nV/√Hz | — |
| Type de sortie | Single-ended | — |
| Boîtier | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode voltage range] |
| Plage de tension de sortie | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage swing range] |
| Courant d'alimentation | [DATA_NEEDED: typical supply current] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: numeric quiescent current] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: numeric operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Amplifier Type | — | Instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Number of Circuits | — | 1 circuit |
| Selectable Gain | — | 10 V/V or 100 V/V |
| Bandwidth at G=100 | — | 200 kHz |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Maximum Protected Input Voltage | — | ±40 V |
| Gain Accuracy | — | [DATA_NEEDED: numeric gain error and tolerance] |
| Temperature Grade | — | Industrial |
| Terminal Count | — | 8 terminals |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |