INA141UAG4 vs INA141UA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA141UAG4 tarafından Texas Instruments ve INA141UA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA141UAG4 - 1 MHz Instrumentation Amplifier | Texas Instruments
INA141UAG4 ObsoleteÖzellik Karşılaştırması
| Parametre | INA141UAG4 | INA141UA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Obsolete | Aktif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Count | 3 amplifiers | — |
| Gain | 10 or 100 | — |
| Bandwidth | 1 MHz | — |
| Common-Mode Rejection Ratio | 110 dB | — |
| Input Offset Voltage | 20 µV | — |
| Input Offset Voltage, Datasheet Listing | 250 µV | — |
| Input Noise Density | 8 nV/√Hz | — |
| Çıkış Türü | Single-ended | — |
| Paket | 8-SOIC, 0.154 inch body width, 3.90 mm width | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | ±18 V |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode voltage range] |
| Çıkış Gerilimi Aralığı | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: output voltage swing range] |
| Besleme Akımı | [DATA_NEEDED: typical supply current] | — |
| Durağan Akım | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: numeric quiescent current] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: numeric operating temperature range] |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Amplifier Type | — | Instrumentation amplifier |
| Architecture | — | Three-op-amp design |
| Number of Circuits | — | 1 circuit |
| Selectable Gain | — | 10 V/V or 100 V/V |
| Bandwidth at G=100 | — | 200 kHz |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Maximum Protected Input Voltage | — | ±40 V |
| Gain Accuracy | — | [DATA_NEEDED: numeric gain error and tolerance] |
| Temperature Grade | — | Industrial |
| Terminal Count | — | 8 terminals |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |