INA154UA vs INA154U Vergleich
Detaillierter Direktvergleich von INA154UA von Texas Instruments und INA154U von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments
INA154UA ✓ AktivTexas Instruments
INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments
INA154U ✓ AktivSpezifikationsvergleich
| Parameter | INA154UA | INA154U |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | High-speed precision difference amplifier | High-speed, precision difference amplifier (G = 1) |
| Gain | 1 V/V | 1 |
| Bandwidth | 3.1 MHz | 3 MHz |
| Slew Rate | 14 V/µs | 14 V/µs typical |
| Input Offset Voltage | ±750 µV maximum | ±750 µV maximum |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C |
| Gain Error | ±0.05% maximum | ±0.05% maximum |
| Supply Voltage Range | 8 V to 36 V, or ±4 V to ±18 V | ±15 V to ±18 V; exact operating range is [DATA_NEEDED: supply voltage range] |
| Betriebstemperaturbereich | -40°C to +85°C | -40°C to +85°C |
| Number of Amplifiers | 1 | — |
| Gehäuse | 8-pin SOIC | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Differential Input | 2 input channels | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| Number of Channels | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 80 dB minimum |
| Ruhestrom | — | 2.4 mA typical |
| Input Common-Mode Range | — | -25 V to +25 V |
| Input Resistor Network | — | Integrated precision resistor network; resistor absolute tolerance is ±20% |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |