INA154UA vs INA154U Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA154UA tarafından Texas Instruments ve INA154U tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments
INA154UA ✓ AktifTexas Instruments
INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments
INA154U ✓ AktifÖzellik Karşılaştırması
| Parametre | INA154UA | INA154U |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | High-speed precision difference amplifier | High-speed, precision difference amplifier (G = 1) |
| Gain | 1 V/V | 1 |
| Bandwidth | 3.1 MHz | 3 MHz |
| Slew Rate | 14 V/µs | 14 V/µs typical |
| Input Offset Voltage | ±750 µV maximum | ±750 µV maximum |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C |
| Gain Error | ±0.05% maximum | ±0.05% maximum |
| Supply Voltage Range | 8 V to 36 V, or ±4 V to ±18 V | ±15 V to ±18 V; exact operating range is [DATA_NEEDED: supply voltage range] |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40°C to +85°C |
| Number of Amplifiers | 1 | — |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Differential Input | 2 input channels | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Besleme Akımı | [DATA_NEEDED: supply current] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | unknown |
| Number of Channels | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 80 dB minimum |
| Durağan Akım | — | 2.4 mA typical |
| Input Common-Mode Range | — | -25 V to +25 V |
| Input Resistor Network | — | Integrated precision resistor network; resistor absolute tolerance is ±20% |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |