INA154UA vs INA154U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA154UA disebabkan oleh Texas Instruments dan INA154U disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments
INA154UA ✓ AktifTexas Instruments
INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments
INA154U ✓ AktifPengandingan Spesifikasi
| Parametr | INA154UA | INA154U |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | High-speed precision difference amplifier | High-speed, precision difference amplifier (G = 1) |
| Gain | 1 V/V | 1 |
| Bandwidth | 3.1 MHz | 3 MHz |
| Slew Rate | 14 V/µs | 14 V/µs typical |
| Input Offset Voltage | ±750 µV maximum | ±750 µV maximum |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C |
| Gain Error | ±0.05% maximum | ±0.05% maximum |
| Supply Voltage Range | 8 V to 36 V, or ±4 V to ±18 V | ±15 V to ±18 V; exact operating range is [DATA_NEEDED: supply voltage range] |
| Gambaran Suhu Operasi | -40°C to +85°C | -40°C to +85°C |
| Number of Amplifiers | 1 | — |
| Kemasan | 8-pin SOIC | 8-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface mount |
| Differential Input | 2 input channels | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Arus Pemberi Arus | [DATA_NEEDED: supply current] | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| Number of Channels | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 80 dB minimum |
| Arus Dalam Tentera | — | 2.4 mA typical |
| Input Common-Mode Range | — | -25 V to +25 V |
| Input Resistor Network | — | Integrated precision resistor network; resistor absolute tolerance is ±20% |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |