INA154UA vs INA154U Comparaison
Comparaison détaillée côte à côte de INA154UA par Texas Instruments et INA154U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA154UA - 3.1MHz Precision Difference Amplifier | Texas Instruments
INA154UA ✓ ActifTexas Instruments
INA154U - 3MHz High-Speed Difference Amplifier | Texas Instruments
INA154U ✓ ActifComparaison des spécifications
| Paramètre | INA154UA | INA154U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | High-speed precision difference amplifier | High-speed, precision difference amplifier (G = 1) |
| Gain | 1 V/V | 1 |
| Bandwidth | 3.1 MHz | 3 MHz |
| Slew Rate | 14 V/µs | 14 V/µs typical |
| Input Offset Voltage | ±750 µV maximum | ±750 µV maximum |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C |
| Gain Error | ±0.05% maximum | ±0.05% maximum |
| Supply Voltage Range | 8 V to 36 V, or ±4 V to ±18 V | ±15 V to ±18 V; exact operating range is [DATA_NEEDED: supply voltage range] |
| Plage de température de fonctionnement | -40°C to +85°C | -40°C to +85°C |
| Number of Amplifiers | 1 | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Differential Input | 2 input channels | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| Number of Channels | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 80 dB minimum |
| Courant de repos | — | 2.4 mA typical |
| Input Common-Mode Range | — | -25 V to +25 V |
| Input Resistor Network | — | Integrated precision resistor network; resistor absolute tolerance is ±20% |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |