IR2132SPBF vs IR2132STRPBF Vergleich
Detaillierter Direktvergleich von IR2132SPBF von Infineon und IR2132STRPBF von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | IR2132SPBF | IR2132STRPBF |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,55 | $4,95 |
| Part Number | IR2132SPBF | — |
| Manufacturer | Infineon Technologies (formerly International Rectifier) | — |
| Funktion | Half-Bridge Gate Driver IC (3-phase, 6-channel) | — |
| Configuration | Inverting input | 3-Phase Bridge |
| Anzahl der Ausgänge | 6 (3 high-side, 3 low-side) | — |
| Maximum Offset Voltage (High-Side) | 600 V | — |
| Output Current (Source/Sink) | 0.5 A | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Input Compatibility | CMOS/LSTTL, down to 2.5 V logic | — |
| Typical Deadtime | 0.8 us | — |
| Undervoltage Lockout (UVLO) | Yes, all 6 channels | Yes, on all channels |
| Bootstrap Design | Required for high-side channels | — |
| dV/dt Immunity | Yes | Yes (negative transient tolerant) |
| Negative VS Transient Tolerance | Yes | — |
| Gehäuse | 28-SOIC (Wide Body, 7.50 mm) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Lead-Free / RoHS | Yes (PbF suffix, RoHS compliant) | — |
| Packaging | Tube | — |
| Topologie | 3-phase bridge driver for MOSFETs/IGBTs | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| RoHS-Status | — | Compliant (PBF suffix) |