IR2132SPBF vs IR2132STRPBF Comparaison
Comparaison détaillée côte à côte de IR2132SPBF par Infineon et IR2132STRPBF par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IR2132SPBF | IR2132STRPBF |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,55 | $4,95 |
| Part Number | IR2132SPBF | — |
| Manufacturer | Infineon Technologies (formerly International Rectifier) | — |
| Fonction | Half-Bridge Gate Driver IC (3-phase, 6-channel) | — |
| Configuration | Inverting input | 3-Phase Bridge |
| Nombre de sorties | 6 (3 high-side, 3 low-side) | — |
| Maximum Offset Voltage (High-Side) | 600 V | — |
| Output Current (Source/Sink) | 0.5 A | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Input Compatibility | CMOS/LSTTL, down to 2.5 V logic | — |
| Typical Deadtime | 0.8 us | — |
| Undervoltage Lockout (UVLO) | Yes, all 6 channels | Yes, on all channels |
| Bootstrap Design | Required for high-side channels | — |
| dV/dt Immunity | Yes | Yes (negative transient tolerant) |
| Negative VS Transient Tolerance | Yes | — |
| Boîtier | 28-SOIC (Wide Body, 7.50 mm) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Lead-Free / RoHS | Yes (PbF suffix, RoHS compliant) | — |
| Packaging | Tube | — |
| Topologie | 3-phase bridge driver for MOSFETs/IGBTs | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| Statut RoHS | — | Compliant (PBF suffix) |