IR2132SPBF vs IR2132STRPBF Comparación
Comparación detallada lado a lado de IR2132SPBF por Infineon y IR2132STRPBF por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | IR2132SPBF | IR2132STRPBF |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $5,55 | $4,95 |
| Part Number | IR2132SPBF | — |
| Manufacturer | Infineon Technologies (formerly International Rectifier) | — |
| Función | Half-Bridge Gate Driver IC (3-phase, 6-channel) | — |
| Configuration | Inverting input | 3-Phase Bridge |
| Número de salidas | 6 (3 high-side, 3 low-side) | — |
| Maximum Offset Voltage (High-Side) | 600 V | — |
| Output Current (Source/Sink) | 0.5 A | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Input Compatibility | CMOS/LSTTL, down to 2.5 V logic | — |
| Typical Deadtime | 0.8 us | — |
| Undervoltage Lockout (UVLO) | Yes, all 6 channels | Yes, on all channels |
| Bootstrap Design | Required for high-side channels | — |
| dV/dt Immunity | Yes | Yes (negative transient tolerant) |
| Negative VS Transient Tolerance | Yes | — |
| Encapsulado | 28-SOIC (Wide Body, 7.50 mm) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Lead-Free / RoHS | Yes (PbF suffix, RoHS compliant) | — |
| Packaging | Tube | — |
| Topología | 3-phase bridge driver for MOSFETs/IGBTs | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| Estado RoHS | — | Compliant (PBF suffix) |