IR2132SPBF vs IR2132STRPBF Comparison

Detailed side-by-side comparison of IR2132SPBF by Infineon and IR2132STRPBF by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Infineon
IR2132SPBF

IR2132SPBF - 600V 3-Phase Half-Bridge Gate Driver | Infineon

IR2132SPBF βœ“ Active
Infineon
IR2132STRPBF

IR2132STRPBF - 600V 3-Phase Gate Driver IC | Infineon

IR2132STRPBF βœ“ Active

Specification Comparison

Parameter IR2132SPBF IR2132STRPBF
Brand Infineon Infineon
Category Power MOSFET Drivers Power MOSFET Drivers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $5.55 $4.95
Part Number IR2132SPBF β€”
Manufacturer Infineon Technologies (formerly International Rectifier) β€”
Function Half-Bridge Gate Driver IC (3-phase, 6-channel) β€”
Configuration Inverting input 3-Phase Bridge
Number of Outputs 6 (3 high-side, 3 low-side) β€”
Maximum Offset Voltage (High-Side) 600 V β€”
Output Current (Source/Sink) 0.5 A β€”
Gate Drive Supply Voltage (VCC) 10 V to 20 V 10 V to 20 V
Logic Input Compatibility CMOS/LSTTL, down to 2.5 V logic β€”
Typical Deadtime 0.8 us β€”
Undervoltage Lockout (UVLO) Yes, all 6 channels Yes, on all channels
Bootstrap Design Required for high-side channels β€”
dV/dt Immunity Yes Yes (negative transient tolerant)
Negative VS Transient Tolerance Yes β€”
Package 28-SOIC (Wide Body, 7.50 mm) 28-SOICWB (0.295 inch / 7.50 mm width)
Mounting Type Surface Mount Surface Mount
Operating Temperature Range -40C to +125C [DATA_NEEDED: operating temperature range]
Lead-Free / RoHS Yes (PbF suffix, RoHS compliant) β€”
Packaging Tube β€”
Topology 3-phase bridge driver for MOSFETs/IGBTs β€”
Driver Type β€” Half-Bridge Gate Driver, Inverting Input
Number of Drivers β€” 6 (3 high-side + 3 low-side)
Offset Voltage (Max) β€” 600 V
Source Current (Typ.) β€” 250 mA
Sink Current (Typ.) β€” 500 mA
Propagation Delay (Typ.) β€” 675 ns
Internal Dead-Time (Typ.) β€” 0.8 Β΅s
Input Logic β€” Inverting (HIN/LIN active-low)
Bootstrap Architecture β€” Yes (floating high-side channel)
Over-Current Protection β€” Yes, with ITRIP input and FAULT output
Integrated Op-Amp β€” Yes (current-sense amplifier)
Fault Output β€” Yes, active-low latched FAULT pin
RoHS Status β€” Compliant (PBF suffix)

Datasheets & Resources

Browse All Products Create BOM Request Quote