LM339DG4 vs LM339MX Vergleich
Detaillierter Direktvergleich von LM339DG4 von Texas Instruments und LM339MX von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM339DG4 | LM339MX |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | 4-channel differential comparator | General Purpose |
| Ausgangstyp | Open collector | Open-Collector |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Maximum Rating | Up to 38 V | — |
| Number of Channels | 4 | — |
| Input Offset Voltage | 0.37 mV | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 3.5 nA | — |
| Versorgungsstrom | 200 uA per comparator | [DATA_NEEDED: supply current] |
| Response Time | 300 ns | 1.3 µs |
| ESD Rating | 2 kV HBM | — |
| Betriebstemperaturbereich | 0 °C to 70 °C | 0 °C to 70 °C |
| Gehäuse | 14-pin SOIC | 14-pin SOIC |
| Montageart | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Anzahl der Pins | — | 14 |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |