LM339DG4 vs LM339MX Comparación
Comparación detallada lado a lado de LM339DG4 por Texas Instruments y LM339MX por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM339DG4 | LM339MX |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | 4-channel differential comparator | General Purpose |
| Tipo de salida | Open collector | Open-Collector |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Maximum Rating | Up to 38 V | — |
| Number of Channels | 4 | — |
| Input Offset Voltage | 0.37 mV | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 3.5 nA | — |
| Corriente de alimentación | 200 uA per comparator | [DATA_NEEDED: supply current] |
| Response Time | 300 ns | 1.3 µs |
| ESD Rating | 2 kV HBM | — |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C | 0 °C to 70 °C |
| Encapsulado | 14-pin SOIC | 14-pin SOIC |
| Tipo de montaje | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Número de pines | — | 14 |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |