LM339DG4 vs LM339MX Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM339DG4 disebabkan oleh Texas Instruments dan LM339MX disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM339DG4 | LM339MX |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | 4-channel differential comparator | General Purpose |
| Jenis Output | Open collector | Open-Collector |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Maximum Rating | Up to 38 V | — |
| Number of Channels | 4 | — |
| Input Offset Voltage | 0.37 mV | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | 3.5 nA | — |
| Arus Pemberi Arus | 200 uA per comparator | [DATA_NEEDED: supply current] |
| Response Time | 300 ns | 1.3 µs |
| ESD Rating | 2 kV HBM | — |
| Gambaran Suhu Operasi | 0 °C to 70 °C | 0 °C to 70 °C |
| Kemasan | 14-pin SOIC | 14-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Single-Supply Operation | Supported | — |
| Dual-Supply Operation | Supported | — |
| Output Pull-Up Requirement | External pull-up resistor required | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Bilangan Pin | — | 14 |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |