MC33897D vs MC3486D Vergleich
Detaillierter Direktvergleich von MC33897D von NXP Semiconductors und MC3486D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MC33897D | MC3486D |
|---|---|---|
| Marke | NXP Semiconductors | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Obsolete | Unknown |
| Product Type | Single-wire CAN transceiver | Quadruple differential line receiver |
| Driver/Receiver Count | 1/1 | — |
| Datenrate | 83.33 Kbps | — |
| Versorgungsspannung | 12 V | 5 V single supply |
| Betriebstemperaturbereich | -40°C to +125°C | 0°C to 70°C |
| Gehäuse | 14-SOIC (0.154 inch, 3.90 mm width) | 16-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Packaging | Tube | — |
| Protocol | CAN | — |
| Network Type | Single-wire CAN, SWCAN | — |
| Duplex Mode | Half-duplex | — |
| Communication Medium | Single-wire medium | — |
| Data Link Method | CSMA/CR | — |
| Lead-Free Status | Contains lead | unknown |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 4 independent differential receivers |
| Ausgangstyp | — | TTL-compatible 3-state outputs |
| Input Type | — | Differential |
| Standards Supported | — | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 |
| Output Enable Function | — | 3-state high-impedance output control |
| Transition Time | — | Fast transition times; exact value not provided |
| Compatible Driver | — | MC3487 quadruple differential line driver |
| Logic Compatibility | — | TTL-compatible outputs |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Output High-Level Voltage | — | [DATA_NEEDED: output high-level voltage] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Enable Pin Count | — | [DATA_NEEDED: enable pin count] |