MC33897D vs MC3486D Karşılaştırma
Ayrıntılı yan yana karşılaştırma MC33897D tarafından NXP Semiconductors ve MC3486D tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MC33897D | MC3486D |
|---|---|---|
| Marka | NXP Semiconductors | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Obsolete | Unknown |
| Product Type | Single-wire CAN transceiver | Quadruple differential line receiver |
| Driver/Receiver Count | 1/1 | — |
| Veri Hızı | 83.33 Kbps | — |
| Besleme Gerilimi | 12 V | 5 V single supply |
| İşletim Sıcaklığı Aralığı | -40°C to +125°C | 0°C to 70°C |
| Paket | 14-SOIC (0.154 inch, 3.90 mm width) | 16-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| Packaging | Tube | — |
| Protocol | CAN | — |
| Network Type | Single-wire CAN, SWCAN | — |
| Duplex Mode | Half-duplex | — |
| Communication Medium | Single-wire medium | — |
| Data Link Method | CSMA/CR | — |
| Lead-Free Status | Contains lead | unknown |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 4 independent differential receivers |
| Çıkış Türü | — | TTL-compatible 3-state outputs |
| Input Type | — | Differential |
| Standards Supported | — | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 |
| Output Enable Function | — | 3-state high-impedance output control |
| Transition Time | — | Fast transition times; exact value not provided |
| Compatible Driver | — | MC3487 quadruple differential line driver |
| Logic Compatibility | — | TTL-compatible outputs |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Output High-Level Voltage | — | [DATA_NEEDED: output high-level voltage] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Enable Pin Count | — | [DATA_NEEDED: enable pin count] |