MC33897D vs MC3486D مقایسه
مقایسه دقیق کنار به کنار MC33897D توسط NXP Semiconductors و MC3486D توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | MC33897D | MC3486D |
|---|---|---|
| برند | NXP Semiconductors | Texas Instruments |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | Obsolete | Unknown |
| Product Type | Single-wire CAN transceiver | Quadruple differential line receiver |
| Driver/Receiver Count | 1/1 | — |
| نرخ داده | 83.33 Kbps | — |
| ولتاژ تغذیه | 12 V | 5 V single supply |
| محدوده دمای کاری | -40°C to +125°C | 0°C to 70°C |
| بسته‌بندی | 14-SOIC (0.154 inch, 3.90 mm width) | 16-pin SOIC |
| نوع نصب | Surface mount | Surface mount |
| Packaging | Tube | — |
| Protocol | CAN | — |
| Network Type | Single-wire CAN, SWCAN | — |
| Duplex Mode | Half-duplex | — |
| Communication Medium | Single-wire medium | — |
| Data Link Method | CSMA/CR | — |
| Lead-Free Status | Contains lead | unknown |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 4 independent differential receivers |
| نوع خروجی | — | TTL-compatible 3-state outputs |
| Input Type | — | Differential |
| Standards Supported | — | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 |
| Output Enable Function | — | 3-state high-impedance output control |
| Transition Time | — | Fast transition times; exact value not provided |
| Compatible Driver | — | MC3487 quadruple differential line driver |
| Logic Compatibility | — | TTL-compatible outputs |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Output High-Level Voltage | — | [DATA_NEEDED: output high-level voltage] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Enable Pin Count | — | [DATA_NEEDED: enable pin count] |