MC33897D vs MC3486D तुलना
विस्तृत दोनों ओर की तुलना MC33897D द्वारा NXP Semiconductors और MC3486D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MC33897D | MC3486D |
|---|---|---|
| ब्रांड | NXP Semiconductors | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | Obsolete | Unknown |
| Product Type | Single-wire CAN transceiver | Quadruple differential line receiver |
| Driver/Receiver Count | 1/1 | — |
| डेटा दर | 83.33 Kbps | — |
| सप्लाई वोल्टेज | 12 V | 5 V single supply |
| ऑपरेटिंग तापमान रेंज | -40°C to +125°C | 0°C to 70°C |
| पैकेज | 14-SOIC (0.154 inch, 3.90 mm width) | 16-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Packaging | Tube | — |
| Protocol | CAN | — |
| Network Type | Single-wire CAN, SWCAN | — |
| Duplex Mode | Half-duplex | — |
| Communication Medium | Single-wire medium | — |
| Data Link Method | CSMA/CR | — |
| Lead-Free Status | Contains lead | unknown |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 4 independent differential receivers |
| आउटपुट प्रकार | — | TTL-compatible 3-state outputs |
| Input Type | — | Differential |
| Standards Supported | — | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 |
| Output Enable Function | — | 3-state high-impedance output control |
| Transition Time | — | Fast transition times; exact value not provided |
| Compatible Driver | — | MC3487 quadruple differential line driver |
| Logic Compatibility | — | TTL-compatible outputs |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Output High-Level Voltage | — | [DATA_NEEDED: output high-level voltage] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Enable Pin Count | — | [DATA_NEEDED: enable pin count] |