MPVZ5004G6U vs MPVZ5004GW7U Vergleich
Detaillierter Direktvergleich von MPVZ5004G6U von STMicroelectronics und MPVZ5004GW7U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPVZ5004G6U - 3.92kPa Vented Gauge Pressure Sensor 8-SMD | ST
MPVZ5004G6U ✓ Aktiv
Spezifikationsvergleich
| Parameter | MPVZ5004G6U | MPVZ5004GW7U |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,60 | $6,75 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 3.92 kPa (0 to 0.57 psi) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Ausgangstyp | Analog Voltage | Analog voltage, ratiometric |
| Output Voltage Span | 1 V to 4.9 V (at 5 V supply) | 1.0 V to 4.9 V (at 5 V excitation) |
| Accuracy | [DATA_NEEDED: accuracy] | [DATA_NEEDED: linearity/error %] |
| Versorgungsspannung | 5 V typical | 5.0 V (typ) |
| Versorgungsstrom | [DATA_NEEDED: supply current] | 4 mA typ (per datasheet family) |
| Betriebstemperatur | 0 to 85 degrees Celsius | 0 °C to 85 °C |
| Response Time | 1 ms typical | — |
| Gehäuse | 8-SMD Module | 8-DIP Module (Case 1560-02) |
| Montageart | Surface Mount | Through-Hole (DIP module with tube port) |
| Pressure Port | Single axial vent port (gauge reference) | Male 0.22" (5.59 mm) tube, single axial |
| Sensor Technology | Piezoresistive MEMS | — |
| RoHS-Status | Compliant | [DATA_NEEDED: confirm from datasheet] |
| Output Ratiometric | Yes (scales with VDD) | — |
| Output Voltage at 0 kPa | — | 1.0 V typ |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| Technology | — | Piezoresistive MEMS, monolithic silicon |
| Signal Conditioning | — | On-chip amplifier, temperature-compensated, calibrated |
| Sensitivity | — | approx. 1.0 V / kPa |
| Media Compatibility | — | Non-corrosive dry gases (air) |