MPX10DP vs MPXC2011DT1 Vergleich
Detaillierter Direktvergleich von MPX10DP von STMicroelectronics und MPXC2011DT1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ AktivNXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktivSpezifikationsvergleich
| Parameter | MPX10DP | MPXC2011DT1 |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,09 | $14,95 |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Ausgangstyp | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone bridge (ratiometric) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Gehäuse / Bauform | 4-SIP Module | — |
| Montageart | Through-Hole | Through-hole (PCB mount with side-port tubing) |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | 0 °C to +85 °C |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status not in web data] |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| Gehäuse | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Technology | — | Piezoresistive silicon strain gauge |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |