MPX12D vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPX12D von NXP Semiconductors und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX12D | MPX2010DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,75 | $8,50 |
| Pressure Type | Differential | — |
| Operating Pressure | 1.45 PSI (10 kPa) | — |
| Maximum Overload Pressure | 10.88 PSI (75 kPa) | — |
| Full-Scale Output Voltage | 0 to 55 mV (at 3 V supply) | — |
| Versorgungsspannung | 3 V typical | 10 V DC typical (max 16 V) |
| Accuracy | ±5% | — |
| Ausgangstyp | Wheatstone Bridge (uncompensated) | Analog voltage, Wheatstone bridge (mV level) |
| Termination Style | PCB (through-hole) | — |
| Gehäuse | 4-SIP Module | — |
| Port Size | Female, 0.136 in (3.45 mm) | — |
| Port Style | No Port (base-side pressure inlet) | — |
| Technology | Piezoresistive MEMS silicon shear strain gauge | Piezoresistive (silicon strain gauge bridge) |
| Compensation | Uncompensated (external compensation required) | — |
| Betriebstemperatur | 0 °C to +85 °C | -40 °C to +125 °C |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Montageart | Through-Hole | — |
| Sensortyp | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |