MPX5100D vs MPX5100DP Perbandingan

Perbandingan bersamaan detil MPX5100D dari NXP Semiconductors dan MPX5100DP dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum MPX5100D MPX5100DP
Merek NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Status Lingkungan Hidup Aktif Aktif
Tipe Pengukur Piezoresistive Pressure Sensor (Differential) —
Pressure Range 0 kPa to 100 kPa (0 PSI to 14.5 PSI) —
Pressure Type Differential Differential
Tegangan Pemuat 4.75 V to 5.25 V —
Arus Pemuat [DATA_NEEDED: Supply Current] —
Full-Scale Span 45 mV/kPa typical —
Tipe Output Analog Voltage, Ratiometric Analog, ratiometric to Vcc
Rentang Tegangan Output 0.2 V (zero pressure) to 4.7 V (full-scale) 0.2 V to 4.7 V (ratiometric, ~4.5 V span)
Accuracy ±1.8 %VFSS maximum ±2.5% (0 to 85 °C)
Suhu Kerja -40 °C to +125 °C -40 °C to +125 °C
Pressure Port Dual axial tube ports (Differential), 0.19 inch (4.93 mm) —
Paket 6-SIP Module (Case 867) 6-SIP Module (through-hole)
Tipe Mounting Through-Hole Through-Hole (SIP)
Output Response Time [DATA_NEEDED: Response Time] —
Status RoHS Compliant [DATA_NEEDED: RoHS compliance status]
Reflow Compatible No (through-hole module) —
Media Compatibility Non-corrosive dry gases (filtered dry air recommended) —
Operating Pressure Range — 0 kPa to 100 kPa (0 to 14.5 PSI)
Maximum Overload Pressure — [DATA_NEEDED: maximum overload pressure]
Supply Voltage (Vcc) — 5 V (nominal)
Sensitivity — 45 mV/kPa nominal
Response Bandwidth — 1 kHz (typical)
Port Configuration — Dual ports, male 0.19" (4.93 mm) tube, same side
Signal Conditioning — On-chip amplifier, temperature compensation, calibration
Technology — Piezoresistive MEMS with bipolar ASIC
Lead-Free — [DATA_NEEDED: lead-free status]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon