MW6IC2240NBR1 vs MW7IC2240NBR1 Vergleich
Detaillierter Direktvergleich von MW6IC2240NBR1 von NXP Semiconductors und MW7IC2240NBR1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MW6IC2240NBR1 - 2.11-2.17 GHz 4.5W RF LDMOS Amplifier | NXP
MW6IC2240NBR1 Obsolete
Spezifikationsvergleich
| Parameter | MW6IC2240NBR1 | MW7IC2240NBR1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Amplifiers | RF Amplifiers |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $19,80 | $29,00 |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | RF LDMOS (multi-stage integrated) |
| RF Type | Cellular, W-CDMA, TD-SCDMA driver amplifier | — |
| Frequency Range | 2110 MHz to 2170 MHz | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Supply Voltage (Operating) | 26 V to 32 V (typical 28 V) | — |
| Average Output Power (2-carrier W-CDMA) | 4.5 W (typ) | — |
| Power Gain | 29 dB (typ, 2-carrier W-CDMA, Pout = 25 dBm) | — |
| Drain Current (operating, Pout=25 dBm avg) | 210 mA (typ) | — |
| Quiescent Current Stage 1 (IDQ1) | 300 mA | 90 mA |
| Quiescent Current Stage 2 (IDQ2) | 320 mA | 420 mA |
| IM3 (10 MHz offset, 2-carrier W-CDMA) | -59 dBc (typ) | — |
| ACPR (5 MHz offset, 2-carrier W-CDMA) | -62 dBc (typ) | — |
| VSWR Tolerance | 3:1 at 28 Vdc, 2170 MHz, 20 W CW | — |
| Gehäuse | TO-272 WB-16 (over-molded plastic, 16-lead wideband) | TO-272 WB-16 (over-molded plastic, 16-lead) |
| Number of Stages | 2 (cascaded, integrated) | — |
| Input / Output Matching | On-chip, 50 ohm single-ended | — |
| Operating Case Temperature | [DATA_NEEDED: operating case temperature range] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| Modulation / RF Type | — | W-CDMA (also TD-SCDMA, LTE) |
| Output Power (Average) | — | 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA |
| Supply Voltage (VDD) | — | 28 V (rated 24 V to 32 V operation) |
| Minimum Gain | — | 15 dB (typical 30 dB) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (on-chip matched) |
| P1dB (Output) | — | 46 dBm (per distributor listing) |
| Montageart | — | Surface Mount |
| Terminal Finish | — | Matte Tin (Sn) |
| Package Body Material | — | Plastic / Epoxy |
| Operating Mode | — | 100% PAR tested for W-CDMA-like signals |