MW6IC2240NBR1 vs MW7IC2240NBR1 비교
다음의 상세 나란히 비교: MW6IC2240NBR1 제조: NXP Semiconductors 및 MW7IC2240NBR1 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MW6IC2240NBR1 - 2.11-2.17 GHz 4.5W RF LDMOS Amplifier | NXP
MW6IC2240NBR1 Obsolete
사양 비교
| 파라미터 | MW6IC2240NBR1 | MW7IC2240NBR1 |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | RF Amplifiers | RF Amplifiers |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $19.80 | $29.00 |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | RF LDMOS (multi-stage integrated) |
| RF Type | Cellular, W-CDMA, TD-SCDMA driver amplifier | — |
| Frequency Range | 2110 MHz to 2170 MHz | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Supply Voltage (Operating) | 26 V to 32 V (typical 28 V) | — |
| Average Output Power (2-carrier W-CDMA) | 4.5 W (typ) | — |
| Power Gain | 29 dB (typ, 2-carrier W-CDMA, Pout = 25 dBm) | — |
| Drain Current (operating, Pout=25 dBm avg) | 210 mA (typ) | — |
| Quiescent Current Stage 1 (IDQ1) | 300 mA | 90 mA |
| Quiescent Current Stage 2 (IDQ2) | 320 mA | 420 mA |
| IM3 (10 MHz offset, 2-carrier W-CDMA) | -59 dBc (typ) | — |
| ACPR (5 MHz offset, 2-carrier W-CDMA) | -62 dBc (typ) | — |
| VSWR Tolerance | 3:1 at 28 Vdc, 2170 MHz, 20 W CW | — |
| 패키지 | TO-272 WB-16 (over-molded plastic, 16-lead wideband) | TO-272 WB-16 (over-molded plastic, 16-lead) |
| Number of Stages | 2 (cascaded, integrated) | — |
| Input / Output Matching | On-chip, 50 ohm single-ended | — |
| Operating Case Temperature | [DATA_NEEDED: operating case temperature range] | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS compliance] |
| Modulation / RF Type | — | W-CDMA (also TD-SCDMA, LTE) |
| Output Power (Average) | — | 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA |
| Supply Voltage (VDD) | — | 28 V (rated 24 V to 32 V operation) |
| Minimum Gain | — | 15 dB (typical 30 dB) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (on-chip matched) |
| P1dB (Output) | — | 46 dBm (per distributor listing) |
| 실장 유형 | — | Surface Mount |
| Terminal Finish | — | Matte Tin (Sn) |
| Package Body Material | — | Plastic / Epoxy |
| Operating Mode | — | 100% PAR tested for W-CDMA-like signals |