NE5532AP vs NE5532N Vergleich
Detaillierter Direktvergleich von NE5532AP von Texas Instruments und NE5532N von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532AP | NE5532N |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Manufacturer | Texas Instruments | — |
| Part Number | NE5532AP | — |
| Amplifier Type | Low-Noise Operational Amplifier | General Purpose |
| Number of Channels | 2 (Dual) | — |
| Gehäuse / Bauform | 8-PDIP (through-hole, 2.54 mm pitch) | — |
| Supply Voltage (Dual) | ±5 V to ±15 V (max ±18 V) | — |
| Unity-Gain Bandwidth | 10 MHz (typ.) | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz (typ. at 1 kHz) | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | 9 V/µs |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typ.) | — |
| DC Voltage Gain | 100 V/mV (typ., 100 dB) | — |
| Peak-to-Peak Output Swing | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) | — |
| Output Drive | 600 ohm loads (typ.) | Improved output-drive capability |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Betriebstemperaturbereich | 0 °C to +70 °C (NE5532x commercial) | [DATA_NEEDED: operating temperature range] |
| Montageart | Through-Hole (PDIP) | — |
| RoHS-Status | Compliant (Pb-free) | — |
| Product Type | — | Dual internally compensated operational amplifier |
| Number of Circuits | — | 2 |
| Gehäuse | — | 8-PDIP (0.300 in, 7.62 mm) |
| Packaging | — | Tube |
| Gain Bandwidth Product | — | 10 MHz |
| Compensation | — | Internal frequency compensation |
| Noise Performance | — | Low noise |
| Small-Signal Bandwidth | — | High small-signal bandwidth |
| Power Bandwidth | — | High power bandwidth |
| Montagestil | — | Through-hole |
| Versorgungsspannung | — | [DATA_NEEDED: supply voltage] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |