NE5532AP vs NE5532N Comparaison
Comparaison détaillée côte à côte de NE5532AP par Texas Instruments et NE5532N par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ ActifComparaison des spécifications
| Paramètre | NE5532AP | NE5532N |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Manufacturer | Texas Instruments | — |
| Part Number | NE5532AP | — |
| Amplifier Type | Low-Noise Operational Amplifier | General Purpose |
| Number of Channels | 2 (Dual) | — |
| Boîtier / Format | 8-PDIP (through-hole, 2.54 mm pitch) | — |
| Supply Voltage (Dual) | ±5 V to ±15 V (max ±18 V) | — |
| Unity-Gain Bandwidth | 10 MHz (typ.) | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz (typ. at 1 kHz) | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | 9 V/µs |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typ.) | — |
| DC Voltage Gain | 100 V/mV (typ., 100 dB) | — |
| Peak-to-Peak Output Swing | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) | — |
| Output Drive | 600 ohm loads (typ.) | Improved output-drive capability |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Plage de température de fonctionnement | 0 °C to +70 °C (NE5532x commercial) | [DATA_NEEDED: operating temperature range] |
| Type de montage | Through-Hole (PDIP) | — |
| Statut RoHS | Compliant (Pb-free) | — |
| Product Type | — | Dual internally compensated operational amplifier |
| Number of Circuits | — | 2 |
| Boîtier | — | 8-PDIP (0.300 in, 7.62 mm) |
| Packaging | — | Tube |
| Gain Bandwidth Product | — | 10 MHz |
| Compensation | — | Internal frequency compensation |
| Noise Performance | — | Low noise |
| Small-Signal Bandwidth | — | High small-signal bandwidth |
| Power Bandwidth | — | High power bandwidth |
| Style de montage | — | Through-hole |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |