OPA830ID vs OPA828ID Vergleich
Detaillierter Direktvergleich von OPA830ID von Texas Instruments und OPA828ID von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
OPA828ID - 45MHz JFET Op Amp, 4nV/√Hz | TI | Precision Amplifier (Tape & Reel)
OPA828ID ✓ AktivSpezifikationsvergleich
| Parameter | OPA830ID | OPA828ID |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Stückpreis (USD) | — | $1,75 |
| Amplifier Type | Voltage-feedback operational amplifier | JFET-input operational amplifier |
| Number of Channels | 1 circuit | 1 |
| Gain-Bandwidth Product | 110 MHz | — |
| Single-Supply Operation | 3 V or 5 V | — |
| Additional Supply Configurations | ±5 V or +10 V | — |
| Input Voltage Noise Density | 9.2 nV/√Hz | 4 nV/√Hz at 1 kHz |
| Input Common-Mode Range | Extends below the negative supply and to within 1.7 V of the positive supply | — |
| Output Swing | Within 25 mV of either supply | — |
| Output Stage | Complementary common-emitter | — |
| Primary Application | Fixed-gain line driver | — |
| Gehäuse | 8-SOIC, 0.154 inch body width, 3.90 mm | 8-SOIC (SO-8) |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 50 uV |
| Slew Rate | [DATA_NEEDED: slew rate] | 150 V/us |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Gain Bandwidth Product | — | 45 MHz |
| Input Voltage Noise (0.1 Hz to 10 Hz) | — | 60 nVRMS |
| Input Bias Current | — | 1 pA (typical) |
| Input Offset Voltage Drift | — | 0.45 uV/C |
| Supply Voltage Range | — | ±4 V to ±18 V (36 V total) |
| Ausgangstyp | — | Rail-to-rail output (RRO) |
| Input Type | — | MUX-friendly JFET inputs |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Predecessor Parts | — | OPA627, OPA827 |